Exitex Draught Seal Insulating Glazing Film - 9.0m2
€30.99
Out of stock
SKU
TP_5016570006736
Exitex Draught Seal Insulating Glazing Film - 9.0m2
- Quick, economical & easy to install
- Creates a secondary glazing effect on windows, reducing heating costs
- Comes complete with double sided fixing tape
Instructions:
- Hands must be absolutely clean when touching the film. Avoid touching the inner surface of the film or the exposed adhesive tape.
- Wash glass and dry thoroughly using a clean cloth.
- Cut adhesive tape to lengths required and apply to top, bottom and sides of window frame. If the room is very cold warm the window frame with a hairdryer before applying the tape.
- The film is supplied double folded. Unfold and cut the film slightly larger than the taped area of the window. Ensure that the insiode fold of the film faces the window ready for application.
- Remove backing paper from tape and press film firmly into place along the length of the tape. Keep the film as smooth as possible to avoid wrinkles.
- Important, allow approx. 30 minutes for the tape adhesive to cure before proceeding to the next step.
- Holding a hairdryer a few inches away from the film, apply heat starting at the top and working downwards. Keep the hairdryer moving around all the time until the film tightens and wrinkles smooth out. Do not overshrink the film.
- Leave the film to cool for 10 minutes then flick it lightly with your finger: if it makes a drum sound, fitting is complete.
- Trim off surplus film overlapping tape.
Customer Questions
More from Exitex
Write Your Own Review