Bathroom Light Bulb

Here are 3 easy steps on how to change a 2D Light Bulb

 

Step 1 - Turn off the light at the wall

 

Step 2 - Remove the cover

Take out the screws remembering to support the cover or by gently pushing the cover inward, within the mounting and then slide the cover to one side, releasing the holding clips - it will release.

Step 3 – Changing the lamp

Change the bulb by holding the centre point of the bulb unit (not the bulb’s itself) and pulling it out of the fitting. If the unit is stiff, just gently wiggle the lamp on the way out. There is no catch or clips to release the lamp, it is just a simple push fit system. 
To replace: simply push the new bulb back into the fitting, and ad secure the cover with the screws or push it back on. Depending on the size you will need either 2pin or 4pin.

Remember: The bulb is long lasting and 80% cheaper to run than standard bulbs!

 

Where can you purchase a 2D lamp?

Find 2D Lightbulbs here on our website.

 

Tags: change a lightbulb change a 2d lightbulb