Briwax Original 200g - Clear

Briwax Original 200g - Clear

• Briwax Original is formulated to be fast drying and also increase the cleaning ability of the wax.

• This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine.

• Unsealed wooden surfaces should be smooth, dry and clean.

• Apply Briwax using a lint free cloth or 0000 Steel Wool, thoroughly working the wax into the grain.

• Once dry, buff to desired finish with a clean soft cloth. Improved shine and durability can be achieved by first sealing the surface with Briwax Sanding Sealer.

• For antiques and pre-finished furniture, first check compatibility, then apply Briwax in small areas with a clean soft cloth.

• The Briwax finish can be maintained by further applications which will give increased hardness and shine.

• This product is not recommended for use in areas where it will come into contact with water.

• Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.

Features and benefits

• Suitable for use on most wooden surfaces.

• Easy to apply and buff

• Gives a long lasting Satin Sheen

• Rapid Dry

• Can be applied directly to timber or onto Briwax Sanding Sealer

Surface Preparation:

The surface must be clean and dry. Briwax Original Polish can be used on previously waxed surfaces. For best results initially clean the surface with Briwax Wax Polish Remover.

Instructions for Use

Apply to the surface with a soft lint free cloth

Legal information:

Highly Flammable. Harmful: danger of serious damage to health by prolonged exposure by Inhalation. May cause lung damage if swallowed. Possible risk of harm to the unborn child. Vapours may cause drowsiness or dizziness.