Dulux Trade Interior Diamond Glaze Clear Floor Varnishes

Dulux Trade Interior Diamond Glaze Clear Floor Varnishes

Ten times tougher than conventional floor varnish, it is a high performance water-based lacquer formulated for use on solid softwood and hardwood floors and other high wear interior wood surfaces.

• For all high wear interior wood surfaces, especially floors.
• Up to 10 times tougher than conventional varnish.
• Water-based, quick-drying - recoat in 2-4 hours.
• One pack system - reduces waste.
• Suitable for interior use only.

To get the best results make sure the surfaces to be painted are sound, clean and dry. All traces of grease, wax and polish must be completely removed.

Use: Apply 2 or 3 coats of Diamond Glaze from Dulux Trade using either a brush or short pile mohair roller. Apply evenly and consistently, taking care to keep the 'wet edge' alive and finish off along the grain. It is advisable to apply a small test area first. When recoating allow at least 2 hours between coats. Rub down lightly along the grain between coats using a fine grade abrasive paper and dust off.