Erfurt Damp Stop Wallrock Adhesive - 1Kg

Wallrock Damp Stop Adhesive

• Specially formulated adhesive suitable for application of Wallrock Damp Stop wallcovering
• A solvent free, fast drying, high solids adhesive designed to adhere metallic foils to plastic and other materials

Instructions for applying Wallrock Damp Stop Adhesive

1. Stir well before use
2. Remove loose or flaky material from the wall surface as well as any projections that may rupture the Wallrock Damp Stop, fill any holes. The surface may need priming if excessively porous or absorbent, we recommend diluting Wallrock Damp Stop Adhesive 1:1 with water to form a primer, allow to dry thoroughly.
3. Brush the adhesive onto the wall over a slightly wider area than the Wallrock Damp Stop strip - you will need typically 160-200ml per m²
4. Apply the Wallrock Damp Stop directly to the pasted surface - silver foil side to the wall
5. If applying multiple lengths we recommend an overlap of at least 8mm.
6. Once complete allow to dry thoroughly - a minimum of 24 hours is normally sufficient but longer may be required
7. Wash the brush out in warm soapy water