HG Super Protector For Wall And Floor Grout 250ml

With HG Super Protector for wall and floor grout, grouts will become fully resistant to water, oils, grease and dirt., keeping it clean and dirt free

Instructions for use:

1. Using HG Grout Cleaner, clean the grouts thoroughly and allow it to dry.
2. With either the pipette or brush, apply HG Super Protector for wall and floor grout to the grouts, until fully absorbed.
3. Allow the treated grout to dry for 1 hour and repeat the treatment once for optimal protection.
4. After 36 to 48 hours, the treated surface can be cleaned normally.

Where to use

• Grouts between wall tiles
• Joints on the floors of bathrooms and kitchens

Coverage

• A bottle of HG Super Protector for wall and floor grout is sufficient for an area approximate 20m2. Use 250 ml per 30-40m2 of floor area (based on floor tiles measuring 30 x 30cm, and a grout thickness of 0.5cm).