Rustins Button Polish
Out of stock
Only %1 left
SKU
RUSTINSBUTTON
Antiquax Copper & Brass Polish - 200ml
Previous
- Wood should be clean and smooth.
- If grain is open, fill with Rustins Grainfiller.
- Stain if necessary with Rustins Wood Dye.
- Seal the Wood with two coats of Rustins Shellac Sanding Sealer prior to polishing and applying Wood Dye.
- Apply with a "Rubber" made by wrapping a piece of cotton wool in cotton or linen rag the size of a handkerchief.
- Pour polish into rubber and squeeze out excess, dab a spot of linseed oil on the rubber, and work in a circular or figure of 8 motion.
- Apply several coats, sandpaper lightly between coats if necessary.
- Finish using straight even strokes with polish thinnedwith methylated spirits.
- Use in a warm, dry atmosphere.
- Leave 24 hours after last coat to harden.
- For sealing wood before waxing, apply 2 coats with a brush or rag
Customer Questions
Customers Also Bought..
Write Your Own Review